€336.97
HEMNES / ORRSJÖN wash-stnd w drawers/wash-basin, 62x89x49 cm
HEMNES / ORRSJÖN wash-stnd w drawers/wash-basin, 62x89x49 cm
1 / 5
Product Details

Key Features

  • Coordinates nicely with other products in the HEMNES series.
  • The straightforward, crafted look of the drawers and knobs enhances the Scandinavian expression.
  • The washbasin splashback prevents water from running down behind the bathroom cabinet.
  • The drawers are rigorously tested to make sure they can be opened and closed over many years of morning rush hour.
  • You create a traditional expression and your own unique style with the oval wash-basin, raised edges and double-handle mixer tap that remind of turn of the century design.
Care Instructions
  • Wipe clean with a cloth dampened in a mild cleaner.
  • Wipe dry with a clean cloth.
  • Wet marks should always be dried off as soon as possible to stop moisture penetration.
Good to Know

Included

  • Mixer tap and strainer are included.

Warning

  • The washbasin is resistant to most chemicals, except for strong acids and strong alkalis.
  • WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.

Test results and compliance

  • This product bears the CE mark.

Other information

  • IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Measurements

Width: 62 cm Wash-stand width: 60 cm Depth: 49 cm Height: 89 cm

Assembly

Estimated assembly time: 90 minutes

Specifications, packages and assembly
EAN / Barcode 09654972
Dimensions Width: 62 cm Wash-stand width: 60 cm Depth: 49 cm Height: 89 cm
Number of Packages 3
Assembly Required Yes
Assembly Time 90 minutes

Materials

Frame:
Fibreboard, Pigmented epoxy/polyester powder coating
Filling, side:
Particleboard, Melamine foil, Acrylic paint, Melamine foil
Support rail:
Fibreboard, Acrylic paint
Drawer sides/ Drawer back/ Drawer divider:
Solid pine, Clear acrylic lacquer
Drawer bottom:
Particleboard, Melamine foil, Melamine foil, Plastic edging
Drawer front:
Fibreboard, Pigmented epoxy/polyester powder coating, Pigmented epoxy/polyester powder coating
Cover/ Spring:
Stainless steel
Cover cap/ Mechanism:
Acetal plastic
Sealing ring:
Synthetic rubber
Cover cap:
Polycarbonate/ABS plastic
Basematerial:
Ceramics, Coloured glaze
Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
Polypropylene plastic
Sealing ring/ Gasket/ Seal:
Synthetic rubber
Waste pipe:
Synthetic rubber, Polypropylene plastic
Strainer:
Stainless steel
Seals:
Polyethylene foam
Assembly tool:
ABS plastic