€187.99
ENHET / TVÄLLEN wash-stnd w drawers/wash-basin, white, 44x43x65 cm
ENHET / TVÄLLEN wash-stnd w drawers/wash-basin, white, 44x43x65 cm
Product Details

ENHET series makes it easy to start fresh with a new bathroom solution. This base cabinet for wash-basin has 2 handy drawers for all your essentials, paired with white fronts that brighten the room.

Key Features

  • You can store often-used things like cotton pads, brushes and hygiene products in the top drawer, and other things like towels the bottom drawer.
  • Smooth, durable and easy-to-clean ceramic wash-basin with space for toothbrushes, soap dispenser and other smaller things on the wide back edge.
  • Cleaning the floor is a breeze since this combination is wall-mounted.
  • Drawers with integrated dampers that catch the drawer and close it slowly, silently and softly.
  • The unique wedge dowels make assembly easy and the fittings are nearly invisible.
Care Instructions
  • Wipe clean with a mild soapy solution.
  • Wet marks should always be dried off as soon as possible to stop moisture penetration.
  • Wipe dry with a clean cloth.
Good to Know

Warning

  • WARNING! Falling hazard – to reduce the risk of this product falling down, it must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.
  • This furniture must be fixed to the wall with the enclosed wall fastener.
  • The washbasin is resistant to most chemicals, except for strong acids and strong alkalis.

Safety information

  • If you are uncertain about the strength of your bathroom walls we recommend that you use legs.

Purchase-/Other information

  • Ceramic wash-basins are kiln-fired, which makes each one unique and the size may vary slightly from the measurements given.
  • Water-trap is included.

Sold separately

  • Knobs and handles are sold separately.

Other information

  • IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Assembly

Estimated assembly time: 61 minutes

Assembly Instructions

Specifications, packages and assembly
White
EAN / Barcode 19613354
Weight 29.99 kg
Number of Packages 3
Assembly Required Yes
Assembly Time 61 minutes

Materials

Side panel/ Bottom panel/ Top back rail/ Drawer side/ Drawer back/ Drawer front:
Particleboard, Plastic foil, Plastic edging
Drawer bottom:
Fibreboard, Plastic foil
Ceramics, Coloured glaze
Water trap frame/ Cleaning plug/ Cover cap/ Outlet pipe/ Outlet connector:
Polypropylene plastic
Sealing ring/ Gasket/ Seal:
Synthetic rubber
Waste pipe:
Synthetic rubber, Polypropylene plastic
Strainer:
Stainless steel
Seals:
Polyethylene foam
Assembly tool:
ABS plastic