€889.99
BESTÅ TV storage combination/glass doors, dark grey Lappviken/Fällsvik anthracite, 300x42x211 cm
Ikea BESTÅ - TV storage combination/glass doors, dark grey Lappviken/Fällsvik anthracite, 300x42x211 cm
Product Details

It’s not only the TV that’s smart! BESTÅ TV benches combine contemporary good looks with practical function. You get lots of storage space and relief from cables that tend to get messy and gather dust.

Key Features

  • 10 year guarantee. Read about the terms in the guarantee brochure.
  • It’s easy to keep the cables from your TV and other devices out of sight but close at hand, as there are several cable outlets at the back of the TV bench.
  • The cable outlet at the top lets cables run down smoothly into the TV bench.
  • The drawers have integrated push-openers so that you can open them with just a light push.
  • The drawers make it easy to keep your belongings organised. The shelves behind the doors give you even more storage space.
Care Instructions
  • Wipe clean with a damp cloth.
  • Wipe dry with a clean cloth.
  • Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
Good to Know

Purchase-/Other information

  • We recommend a TV bench to be a bit wider than the TV placed on it. This TV bench suits a TV up to 72 inches. You can choose a larger TV if it’s not heavier than the specified max load for the bench’s top.
  • The top panel of the TV bench is intended for a TV with a maximum weight of 30 kg.

Compl. assembly information

  • The max load for a wall-hung frame depends on the wall material.

Warning

  • Handle with care! A damaged edge or scratched surface can cause the glass to suddenly crack or break. Avoid bumps from the side - this is where the glass is most vulnerable.
  • WARNING! Tipping hazard – this product must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.
  • WARNING! Falling hazard – to reduce the risk of this product falling down, it must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.

Functions (other)

  • The push-open function requires a space between the frame and the drawer front to allow the drawer to be pushed to open. The small gap is necessary to allow this function and is not a product deviation.

May be completed

  • If you want to create a uniform look throughout the home, you can combine FÄLLSVIK front with the matching HEJSTA kitchen front.

Other information

  • IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Measurements

Width: 300 cmDepth: 42 cmHeight: 211 cmDrawer width (internal): 51 cmDrawer depth (internal): 32.5 cmMaximum load/drawer: 10 kgMaximum TV weight: 30 kg

Assembly

Estimated assembly time: 211 minutes

Specifications, packages and assembly
Grey
EAN / Barcode 59507907
Dimensions Width: 300 cmDepth: 42 cmHeight: 211 cmDrawer width (internal): 51 cmDrawer depth (internal): 32.5 cmMaximum load/drawer: 10 kgMaximum TV weight: 30 kg
Weight 117.89 kg
Number of Packages 39
Assembly Required Yes
Assembly Time 211 minutes

Materials

Top panel/ Bottom panel/ Side panel/ Partition:
Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Paper foil, Plastic edging, Plastic edging, Plastic edging
Back panel:
Fibreboard, Paper foil, Plastic foil
Top panel/ Bottom panel:
Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Paper foil, Plastic edging, Plastic edging, Plastic edging
Side panel:
Particleboard, Paper foil, Paper foil, Plastic edging, Plastic edging, Plastic edging
Back panel:
Fibreboard, Paper foil, Plastic foil
Top panel/ Bottom panel/ Side panel:
Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging
Back panel:
Fibreboard, Paper foil, Plastic foil
Particleboard, Fibreboard, Paper foil, Plastic edging, Plastic edging, Plastic edging, Paper foil
Tempered glass
Drawer back/ Drawer side:
Particleboard, Plastic foil
Drawer bottom:
Particleboard, Plastic foil, Paper foil
Galvanized steel
Metal part:
Steel, Nickel-plated
Plastic parts:
Acetal plastic
Particleboard, Paper foil, Plastic edging
Glass panel:
Tempered glass
Frame:
Aluminium, Aluminium, Epoxy/polyester powder coating
Mounting plate:
Steel, Galvanized