HORNVALLMO - Pleated blind, white/top-down bottom-up, 60x130 cm

Highly recommended to attach to surfaces made of glass.

For window frames or surfaces not recommended for the adhesive, mount the brackets with screws using a drill or screwdriver. The brackets are prepared with small holes for this purpose.

To reposition or reuse on another window, remove adhesive-mounted brackets with plastic hand scraper. Replace with new brackets available cost-free at IKEA stores or contact IKEA Customer Services for help.

For door windows or windows taller than 130 cm, mount 2 pleated blinds to cover the whole surface.

Suitable for rooftop windows, tilt windows and turn windows.

If you need to adapt the dimensions of the pleated blind to your window, cut the top/bottom rails and the rods with a metal saw. Cut the fabric with a safety knife.

The top rail of the 60 cm wide blind can be cut max. 40 cm.

The included tool makes it easier to get straight, accurate lines when adapting the size of your rail/rod/fabric. It also protects your fingers.

For a smooth, friction-free glide, apply a few drops of silicone spray lubricant to the lock mechanism in the brackets. Ensure the spray is suitable for plastic and metal.

Can also be used in bathrooms.